Create two partitions on your drive, both using a GUID partition table. Format at the OS X partition as Mac OS X Journaled and the Windows partition as MS DOS FAT. Then boot to Mac OS. Format flash drive for mac and pc. Use Disk Utility to convert that partition to MacOS Extended Journaled. Then download the SuperDuper utility to clone the successful Mac OS installation on that new partition on your Windows disk. Warning: This doesn't make the partition bootable! You have to use another media (DVD or USB) to boot Mac OS on the new partition.

Running Mac OS X on a Hackintosh is great, but most people still need to use Windows every now and them. That's where dual-booting comes in. Dual-booting is the process of installing both Mac OS X and Windows on your computer, so that you can choose between the two when your Hackintosh starts. In this guide, we're going to show you how to set up your Hackintosh to simultaneously boot Windows and OS X El Capitan, by installing both operating systems on separate partitions in the same hard disk-- this is slightly more difficult than, but for many people, it will also be the more convenient solution. Introduction For the purposes of this guide, we'll assume you're using either Windows 8 or Windows 10. (Although Windows 7 also works most of the time, the compatibility is a bit more fuzzy, so we can't give any guarantees.) Real Macs dual-boot Windows and Mac OS X using, an application from Apple that allows you to install the two operating systems on separate partitions in your Mac's hard disk.

However, Boot Camp does not work with Hackintoshes. That being said, setting up a dual-boot system on a Hackintosh is still pretty easy. We've previously covered how to, which is generally the simplest way to do it. However, buying an extra hard disk isn't feasible for everybody. This guide will show you how to install Windows and OS X El Capitan on separate partitions in the same hard disk, instead. For the purposes of this guide, we will be installing Mac OS X before Windows on your computer's hard disk.

Unfortunately, if your computer's hard disk already has Windows installed on it, this guide will probably not work. You will have to erase the current Windows installation on your hard disk before you can proceed. (See the 'One Important Exception' section at the bottom of this guide for an exception to these rules.) This is because Windows is usually installed in 'legacy mode,' which sets up your hard disk with the older that doesn't work properly with OS X.

Installing OS X before Windows allows us to circumvent this problem altogether. The process for dual-booting OS X El Capitan with Windows is pretty similar to the process for dual-booting other versions of OS X.

The main difference is in the 'bootloader,' which is the program that actually boots Windows and Mac OS X when you start your computer. For our purposes, we'll be relying on the new which is now used in all, including tonymacx86's ever-popular. Compared to the older, which we used in, Clover offers better hardware support, faster boot times, and more advanced features for your Hackintosh. Check whether your computer uses UEFI or BIOS When dual-booting OS X El Capitan and Windows on the same hard disk, it is essential to check whether your computer's motherboard uses the newer standard or the older standard. The UEFI/BIOS is essentially the settings page for the motherboard; how you install Windows on a Hackintosh depends on the way your motherboard is set up. Swift how to develop for osx and ios 8. You can enter your computer's UEFI/BIOS by pressing a certain key when your computer starts up. On Gigabyte motherboards, for example, you need to press the Delete key.